Single Water Inlet Valve 3/4 - 3/4 Straight 180° 220V – Solenoid Water Valve

This single water inlet valve is a water valve with 3/4" male thread on both ends, a straight (180°) plastic body and an AC 220-240 V coil. It opens and lets water through when the coil is energised, and closes when power is cut. In the trade it is also called a water valve or a solenoid water valve.

Where Is It Used?

• As a single valve at the water inlet of appliances, opening and shutting off water on a 220 V signal from the control board.
• For automatic on/off control in water lines driven by a 220 V control such as a timer or a float switch.
• If the appliance does not take in water, water does not pass although the valve is powered, or water leaks while the appliance is off, the valve should be checked.

When Replacing

• Compare the connection size with the old valve: on this model the inlet and outlet are on the same axis and both are 3/4" male thread; the length is approximately 12.5 cm.
• The valve works in one direction only; connect the inlet and outlet sides the same way as the old valve.
• Shut off the water and the power before removing or fitting it.
• The coil is for AC 220-240 V; it does not work in 12 V or 24 V control circuits.

Technical Specifications

Frequently Asked Questions

Is a water inlet valve the same part as a solenoid valve?

A water inlet valve is a solenoid water valve that opens and closes by means of a coil. In the trade it is also simply called a water valve.

What is the difference between single, double and triple valves?

A single valve has one coil and one outlet. Double and triple valves have a separate coil for each outlet, so the appliance can feed water to different compartments separately.

What does 180° mean?

It means the inlet and outlet are on the same axis, in a straight line. On 90° models the outlet leaves at a right angle to the inlet.