Inverter Air Conditioner Outdoor Unit Fan Motor 45W DC 310V – 5-Wire BLDC (ZWF-45 / TH4545)
- Stock: In Stock
- Brand: OEM
- Model: 01 87 173
This inverter air conditioner outdoor unit fan motor is a 45 W, DC 310 V brushless (BLDC) permanent magnet motor that drives the axial fan blade of the outdoor unit. Its label code is TH4545 and its trade designation is ZWF-45. The driver is built into the motor: the PCB supplies 310 V DC and a speed signal, and the motor returns the speed feedback to the PCB. The body is 95 mm in diameter, the mounting hole spacing is 125 mm and the shaft is 78 mm long; the shaft end is threaded for the fan blade nut and the motor is fixed by 4 rubber-bushed feet. It is also searched for as an outdoor fan motor or DC fan motor.
Which Air Conditioners Is It Used In?
- In inverter split air conditioners whose outdoor unit uses a 45 W, DC 310 V, 5-wire brushless fan motor.
- Selection is based on the label values and dimensions of the old motor: power (45 W), voltage (DC 310 V), number and order of wires, body diameter, mounting spacing and shaft length must match.
- Compare the rotation direction of the old motor with the arrow on the label; a motor with the opposite direction turns the fan blade the wrong way.
Wiring
- Red – Vm: DC 310 V motor supply
- Black – GND: ground
- White – Vcc: control circuit supply
- Yellow – Vsp: speed control signal
- Blue – FG: speed feedback signal
Fault Symptoms
- The compressor runs but the outdoor fan does not turn, or turns briefly and stops.
- The air conditioner soon stops with a high pressure or fan fault code.
- The fan blade sticks, rubs or makes bearing noise when turned by hand.
When Replacing
- Switch off the air conditioner and wait a few minutes for the PCB capacitors to discharge; the 310 V DC line is dangerous.
- Note the wire order before unplugging the connector from the PCB; the wire colours and order must match the old motor.
- Fit the fan blade on the shaft and tighten the nut, fix the motor by its rubber-bushed feet and route the wires so they do not touch the blade.
- Before fitting, you can check the motor with the air conditioner fan motor tester on our site.
Technical Specifications
| Type | Brushless DC (BLDC) permanent magnet fan motor, built-in driver |
| Label code | TH4545 (trade designation ZWF-45) |
| Voltage / current | DC 310 V / 0.15 A |
| Power | 45 W |
| Protection / insulation class | IP44 / B |
| Wires | 5 wires (Vm, GND, Vcc, Vsp, FG), with connector |
| Body diameter | 95 mm |
| Mounting hole spacing | 125 mm, 4 rubber-bushed feet |
| Shaft | 78 mm (from mounting face), threaded end |
| Overall height | 130 mm |
Frequently Asked Questions
Which air conditioner brand does it fit?
The motor does not carry a brand-specific part number. If the label of your old motor shows 45 W, DC 310 V and 5 wires, and the body diameter, mounting spacing and shaft length also match, it can be used.
Can it replace a 3-wire motor?
No. In 3-wire (U-V-W) motors the driver is on the PCB; this motor has a built-in driver and is connected with 5 wires.
Is the fan blade included?
No. The product is the motor only; the old fan blade is fitted to the new motor.
Loading...
Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.
Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.