Fime VGR0110037 Boiler Fan Motor 60W – Compatible with Viessmann Vitodens 7858296
- Stock: In Stock
- Brand: Fime
- Model: FIM78
The Fime VGR0110037 is a boiler fan motor (fan) that provides the combustion air and flue gas flow of the boiler. It replaces the fan with part number 7858296 in Viessmann Vitodens boilers. Inside its aluminium body there is a scroll-type impeller and a 230 V, 60 W Fime P343 motor. It is made by the Italian manufacturer Fime; in the trade it is also searched as a boiler flue fan or fan motor.
Which Boilers Is It Used In?
- In Viessmann Vitodens boilers whose parts list includes fan 7858296.
- Before ordering, compare the code on the old fan's label (VGR0110037 or 7858296), its power (60 W) and its connection direction.
Fault Symptoms
- The boiler starts but the fan does not turn, there is no ignition and the boiler locks out.
- The fan runs with humming, rubbing or clicking noise; the bearing may be worn or the impeller dirty.
- The fan runs slowly and the boiler goes out from time to time and tries to relight.
When Replacing
- Switch off the electricity and gas to the boiler; work only after the boiler has cooled down.
- Note the positions of the fan plug, any pressure sensing tube and the flue connection before removal.
- Check the connection gaskets when fitting the new fan; a leaking gasket causes flue gas leakage.
- After fitting, run the boiler and check that the fan turns quietly and the boiler lights without problems.
Technical Specifications
| Brand / Model | Fime VGR0110037 |
| Viessmann part no. | 7858296 |
| Compatible with | Viessmann Vitodens boilers |
| Motor | Fime P343 · L25R01800 |
| Voltage | 230 V ~ 50 Hz |
| Power | 60 W |
| Insulation class | Class 180 |
| Body | Aluminium, scroll type |
| Made in | Italy |
Frequently Asked Questions
Can a fan of a different power be fitted?
No. The boiler PCB and combustion settings are matched to the fan's power; use a fan of the same power (60 W) and the same part number as the old one.
What if the fan runs but is noisy?
The noise usually comes from bearing wear or dirt on the impeller. A fan with a worn bearing stops soon; replacing the fan is recommended.
Is the motor sold separately?
This product is a complete fan with body, impeller and motor.
Loading...
Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.
Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.