Elke Poe 170 Refrigeration Compressor Oil 5 Liter

High Viscosity, Superior Protection

Country of Manufacture: Italy. ISO Viscosity Grade: 170. Elke Poe 170, supplied in 5-liter packaging, is a high-viscosity refrigeration compressor oil ideal for industrial refrigeration systems. Clear and pale yellow at 20 °C in liquid form, with a pour point below -25 °C, it provides excellent protection even in cold conditions.

Key Features

• Flash Point: per the ASTM D 92 standard, 265 °C.
• Density: at 20 °C, approximately 960 kg/m³, a strong and reliable composition.
• Water Solubility: Provides protection against moisture with its hygroscopic structure.
• Acid Value: Below 0.2 mg KOH/g, high purity and protection.
• Biodegradability: according to the OECD 301B test, more than 60%, an environmentally conscious product.
• Dielectric Strength: The manufacturer has not specified this value for the ISO 170 grade (datasheet: n.d.).
• Kinematic Viscosity: 165-175 cSt at 40 °C and 17-18.5 cSt at 100 °C, excellent fluidity and heat dissipation.
• ASHRAE 97 Thermal Stability: Clean and deposit-free performance in the 175 °C, 336-hour test.

High Performance Proven in Demanding Tests

Elke Poe 170 has shown superior performance under demanding test conditions, achieving excellent results in areas such as water content, acidity (TAN) values and viscosity change. The absence of metal mobilization shows that it provides long-term protection and high performance in your refrigeration systems.

Compatible Refrigerants and Applications

• Compatible refrigerants: Compatible with R134a, R404A, R407C, R410A, R32, R507, R22 and R1234yf (Elke refrigerant–oil compatibility table; full list on datasheet page 4).
• Not used: Not used in ammonia (R717) systems; the manufacturer recommends mineral oil for these systems.
• Compressor type: ISO VG 170 grade POE; screw compressors and centrifugal pumps are the recommended application.
• Use: Initial compressor fill and oil top-up; retrofit from R12 / R22 / R502 to HFC refrigerants in systems with mineral or alkylbenzene oil residue.
• Miscibility: Miscible with mineral, alkylbenzene, PAO and other POE oils; incompatible with PAG oils. Properties change when mixed with oil of a different viscosity.
• Protection: Anti-wear additive package for steel and aluminum surfaces; rust and corrosion protection including copper alloys; compatible with paints, coatings and elastomers.
• Water content: Below 50 ppm in new product.

Storage and Handling Warnings

• POE oil is hygroscopic and absorbs moisture from the air: close the container tightly immediately after use; store in a dry place between −20 … +40 °C.
• If the product has been stored below −20 °C, warm it above 20 °C before use.
• Packaging: 5 L plastic container, approx. 186 × 131 × 288 mm (2 per carton).
• For transport and safety information, see the product label and the material safety data sheet (MSDS).

Technical document: Elke POE compressor oil datasheet (PDF, English, Rev. 0 – 10/2020)