Elke 11.420 Refrigerant System Leak Stopper R290 - R600 6ML

Product Features

Origin: Italy
Refrigerant Type: R290, R600
Quantity: 6 ML
Purpose of Use: Used to detect and stop leaks in refrigeration systems.

In the field it is also known as a leak sealer or refrigerant leak sealer.

Usage Instructions

Note: The product is for professional use only. Protective goggles and gloves must always be worn during use.

Preventive Check Test

1. Pull a vacuum on the air conditioning system for 5 minutes.
2. Reach "-1 bar" and hold this value for 4 minutes. If you cannot hold this value, the leak is too large to be repaired.

Product Application Instructions

1. Switch on the air conditioner.
2. Connect a suitable hose to the syringe with the adapter (supplied separately) and fill the hose completely by pushing the syringe plunger.
3. Connect the syringe to the low-pressure port of the air conditioning system.
4. Inject the product into the system by pushing the syringe plunger, then disconnect.
5. With the air conditioner on, allow the product to take effect for 20 minutes.

Important Notes

Elke 11.420 Refrigerant System Leak Stopper is an effective solution especially for systems operating with R290 and R600 refrigerants. However, care should be taken when using the product and the instructions given should be followed carefully. It is designed for professional use; incorrect use may damage appliances or reduce its effectiveness.