35W Dishwasher Drain Pump Motor 165261 (Bosch, Siemens, Profilo Compatible)

Ensuring that dirty water is drained smoothly to the plumbing after wash and rinse cycles in dishwashers, the Drain Pump Motor with code 165261 is an OEM-standard spare part that technical services use with confidence when water collects in the bottom of the appliance. Thanks to its bayonet (tabbed) mount design, it locks onto the original pump housing within seconds by turning clockwise and provides a tight seal.

Fully Compatible with the Bosch, Siemens and Profilo Group

It is manufactured as an exact fit for Bosch, Siemens and Profilo (BSH Group) dishwashers, which are among the most frequently serviced in the field. Its powerful 220-240V 35W magnetic motor and durable polymer impeller overcome the resistance created by small organic waste or glass fragments that may get past the filter, preventing blockages. This keeps the machine from showing "E24" or "E25" (cannot drain) error codes.

Key Technical Features and Installation Details

Working with original main board values and featuring standard cable terminals, the motor’s technical details for our technicians in the field are as follows:

• Model Code: PUMP 165261
• Operating Voltage: 220-240V AC (Runs on mains voltage)
• Motor Power: 35W (High-flow water discharge capacity)
• Application: Dishwasher dirty water drain unit.
• Connection Type: Quick connection via the original 2-pin socket (fast-on terminal) at the front, with no terminal block hassle.
• Sealing: High-pressure-resistant O-Ring seal integrated into the pump body.
• Compatible Brands: Bosch, Siemens, Profilo.

Fault and Installation Note for Technicians in the Field

Technician’s Note: If your customer says "The machine finishes the program but water remains inside" or the appliance hums during the drain phase but does not pump water, the problem is most likely glass fragments/seeds stuck inside the pump or deformed coils. Before fitting the new 35W drain pump in its housing, check inside the machine’s pump housing with a flashlight and remove any foreign objects. When you place the pump in its housing and turn it to lock, make sure the black o-ring seal on it is fully seated and not pinched.

Frequently Asked Questions

What does a dishwasher drain pump do?

It drains dirty water to the plumbing after wash and rinse cycles. When it fails, water collects in the bottom of the machine and the appliance cannot drain.

Which brands is the 165261 drain pump compatible with?

It is an exact fit for Bosch, Siemens and Profilo (BSH Group) dishwashers.

What is the equivalent (OEM) code of this pump motor?

The equivalent / original code is 165261; the Yedepa product code is 02 45 35. It can be swapped one-for-one in appliances using this code.

Should the drain pump be replaced for an E24 or E25 error?

E24 and E25 are error codes indicating that the machine cannot drain, and a drain pump failure can cause these errors. The pump locks into its bayonet (tabbed) housing by turning clockwise and seals with an O-Ring seal.

Can I buy regularly with an invoice as a service company/technician?

Yes, all our sales are invoiced. All orders, including those from service companies and technicians, are placed directly through our website.

How do I track my shipment after ordering?

Your shipment tracking number is sent to your e-mail and phone after ordering; you can follow its status in the “Where Is My Shipment?” section.

Can I return or exchange the product?

Yes. Under Consumer Protection Law No. 6502 you have the right of withdrawal/return within 14 days of delivery. To avoid ordering the wrong model, we recommend that you verify compatibility before ordering. Details are on our “Delivery, Returns and Exchanges” page.

What payment and installment options are available?

You can pay by debit/credit card and Tosla, and take advantage of installment/credit options through Fibabanka and Akbank. Current options are listed on our “Payment Options” page.

Where is Yedepa located and how is delivery made?

Yedepa is an e-commerce site; orders are placed through yedepa.com and shipped to your address by courier from our warehouses across Turkey and from our contracted suppliers. Our head office is at Cennet Mah. 2. Yavuz Selim Cad. No:68/A, Küçükçekmece / İstanbul.