Eca Combi Boiler Electronic Pressure Sensor with Threaded Adapter

This pressure sensor is used to measure the water pressure in Eca brand combi boilers as well as other compatible appliances. Having a threaded adapter means the installation can be carried out easily and compatibly with different pipework configurations. This sensor provides the combi boiler control board with the data required to read the correct water pressure.

Product Features

• Brand: Ceme SPA
• Model Number: 52404403
• Type: PE - Indicates the technology type and construction of the sensor.
• Range: 0-4 bar - Indicates the pressure range the sensor can measure.
• Output: 1.5-2.5 Vdc - Specifies the output voltage range of the sensor.
• Input: 5 Vdc Max 8Bar - The maximum voltage and pressure values required for the sensor to operate.

Use and Installation

The pressure sensor is usually located inside the combi boiler appliance, in the water circuit, and continuously monitors the operating pressure of the appliance. It is easy to install and, thanks to the threaded adapter, can fit various pipe connections. If the combi boiler's water pressure deviates from normal values, the sensor reports this to the control board and ensures the necessary corrections are made.

Repair and Maintenance

A sensor of this type must be maintained regularly and replaced when it shows signs of failure. Since the calibration and functionality of the sensor may change over time, periodic checking and calibration if necessary are important. During all maintenance and repair work, for the safety of the appliance, the electrical connection must be disconnected and the water pressure must be low.

Important Note

Care must be taken when working on a combi boiler or any gas appliance. Such work may carry a risk of explosion or poisoning, so it is recommended that this work be carried out by trained and certified professionals.