WZDK13-38G-1 (RD-310-13-8) Midea Compatible AC Indoor Unit Fan Motor (13W, DC310V)

Designed to provide air circulation in the indoor units of inverter air conditioning systems, the WZDK13-38G-1 (RD-310-13-8) DC Brushless Fan Motor stands out for its high efficiency and quiet operation. Fully compatible especially with Midea and air conditioners built on the Midea platform, this 13W resin-encapsulated (Resin Pack) motor restores your system to its original performance and provides balanced airflow.

Quiet Operation and High Energy Efficiency

Thanks to brushless DC technology, which consumes much less energy than conventional AC motors, it both saves electricity and eliminates annoying bearing and fan friction noises in the indoor unit. At a speed of 1400 rpm, it brings the room to the desired temperature as quickly as possible, and its overcurrent and overheating protection ensure long service life.

Key Technical Features and Dimensions

Detailed technical dimensions and electrical ratings are given below so you can check compatibility with your old motor before replacement:

• Model / Equivalent Codes: WZDK13-38G-1, RD-310-13-8, ZKFP-13-8-4, 11002015000150
• Compatible Appliances: All 1-1.5 hp inverter AC indoor units using these part codes, notably Midea.
• Electrical Ratings: DC 310V, 13W Power, 0.06A Current, Class E Insulation (E CL)
• Performance: 8 Poles (8P), 1400 r/min (Revolutions/Minute)
• Dimensions: Motor Body Diameter: 90 mm | Body Height: 55 mm | Shaft Length: 55 mm | Overall Length: 111 mm.
• Cable and Socket Design: 5-pin socket. Wiring: Blue (FG), Red (Vm DC310V), White (Vcc DC15V), Yellow (Vsp DC0~6.5V), Black (GND).

Practical Usage Note for Technicians in the Field

Technician’s Note: When installing the motor, make sure the 5-pin socket is fully seated on the board and that the pin order matches the old motor. The D-section flat on the motor shaft is for the set screw of the fan wheel (squirrel cage); tighten this screw fully to prevent the fan wheel from going out of balance. Also, on inverter air conditioners, fan motor failures caused by a short circuit can also affect the driver module on the main board; it is worth checking the voltage outputs on the board side (especially the 310V and 15V lines) before fitting the new motor.

Frequently Asked Questions

What does the WZDK13-38G-1 AC indoor unit fan motor do?

The WZDK13-38G-1 (RD-310-13-8) is a 13W brushless DC fan motor that provides air circulation in inverter AC indoor units. Thanks to brushless DC technology, it consumes less energy than conventional AC motors and eliminates bearing and fan friction noises in the indoor unit.

What are the equivalent and original part codes of the WZDK13-38G-1 motor?

The product is an exact match for the following codes: WZDK13-38G-1, RD-310-13-8, ZKFP-13-8-4 and 11002015000150. The Yedepa product code is 01 87 159.

Which air conditioners is the WZDK13-38G-1 fan motor compatible with?

It is compatible with 1-1.5 hp inverter AC indoor units that use these part codes, notably Midea and units built on the Midea platform. Before replacement, it is recommended that you compare the label values of your old motor with the product’s technical values.

What are the technical values of the WZDK13-38G-1 motor?

The motor runs on DC 310V; it has 13W power, 0.06A current and Class E insulation. With its 8-pole (8P) design, it rotates at 1400 r/min, has a body diameter of 90 mm and a resin-encapsulated (Resin Pack) body, with overcurrent and overheating protection.

Can I buy regularly with an invoice as a service company/technician?

Yes, all our sales are invoiced. All orders, including those from service companies and technicians, are placed directly through our website.

How do I track my shipment after ordering?

Your shipment tracking number is sent to your e-mail and phone after ordering; you can follow its status in the “Where Is My Shipment?” section.

Can I return or exchange the product?

Yes. Under Consumer Protection Law No. 6502 you have the right of withdrawal/return within 14 days of delivery. To avoid ordering the wrong model, we recommend that you verify compatibility before ordering. Details are on our “Delivery, Returns and Exchanges” page.

What payment and installment options are available?

You can pay by debit/credit card and Tosla, and take advantage of installment/credit options through Fibabanka and Akbank. Current options are listed on our “Payment Options” page.

Where is Yedepa located and how is delivery made?

Yedepa is an e-commerce site; orders are placed through yedepa.com and shipped to your address by courier from our warehouses across Turkey and from our contracted suppliers. Our head office is at Cennet Mah. 2. Yavuz Selim Cad. No:68/A, Küçükçekmece / İstanbul.