Vestel Compatible Dishwasher Single Water Inlet Valve (180°, 2.5 L/min, Snapfix) - 32035069

The original water inlet valve manufactured by TP&REFLEX, which will improve the speed and reliability of your dishwasher repairs, is in stock. This part permanently solves chronic complaints such as the appliance not taking in water or continuously leaking water into the machine when closed, and is fully compatible with appliances of brands such as Vestel, Seg and Windsor. Thanks to its Snapfix (plastic snap-in bracket) design, it offers technicians practical installation within seconds without extra screwing.

Key Technical Values

• Original Part Code (OEM): 32035069 (Can also be used without problems in place of 32032593).
• Model and Angle: Single outlet. 180° straight design with the water inlet and outlet in line.
• Electrical Values: 8VA power consumption with a 220-240V, 50-60Hz mains supply. Oxidation-resistant standard terminals at a 180° right angle.
• Capacity and Pressure: Wide supply pressure tolerance from 0.2 to 10 bar and precise flow control providing a constant flow of 2.5 liters per minute (± 15%) to the machine.
• Heat Resistance: Special diaphragm resistant to a maximum operating water temperature of 90°C, in case the dishwasher is connected directly to the hot water line.

Physical Connection Features

• Mains Water Inlet: Standard 3/4 inch male-threaded connection suitable for use with a gasketed strainer (filter).
• Machine Water Outlet: Ø 10.5mm outlet spigot that provides excellent sealing with a hose clamp.
• Body Mounting: Snap-in PLS. BRACKET (Valve ES 180/88 Snapfix) system that locks onto the rear panel of the machine by turning or by pushing directly.

Technician's Advice and Service Practice

For "machine does not take in water" faults in the field, before replacing the valve always confirm with a multimeter whether 220V reaches the coil terminals (when the PCB sends the water fill command). The fault may also be mechanical (a clogged filter); checking whether the 3/4" inlet strainer is clogged with limescale or sand prevents unnecessary part replacement.

Frequently Asked Questions

Which faults does this water inlet valve solve?

It solves complaints such as the dishwasher not taking in water or continuously leaking water into the machine when closed. It is a single-outlet valve with a 180° straight design that controls the water supply to the appliance.

What are the equivalent / original (OEM) codes of the valve?

The original part code is 32035069; it can also be used without problems in place of the part with code 32032593. The Yedepa product code is O0006630.

Which dishwasher brands is this valve compatible with?

It is compatible with appliances of the Vestel, Seg and Windsor brands. Thanks to its Snapfix (plastic snap-in bracket) design, it is installed without screws.

What are the technical values of the water inlet valve?

It has a supply pressure tolerance of 0.2 - 10 bar and provides a flow rate of 2.5 liters per minute (± 15%). It consumes 8VA with a 220-240V, 50-60Hz supply; its diaphragm is resistant to a maximum water temperature of 90°C. The mains inlet is 3/4 inch male-threaded and the machine outlet is Ø 10.5mm.

Can I buy regularly with an invoice as a service company/technician?

Yes, all our sales are invoiced. All orders, including those from service companies and technicians, are placed directly through our website.

How do I track my shipment after ordering?

Your shipment tracking number is sent to your e-mail and phone after ordering; you can follow its status in the “Where Is My Shipment?” section.

Can I return or exchange the product?

Yes. Under Consumer Protection Law No. 6502 you have the right of withdrawal/return within 14 days of delivery. To avoid ordering the wrong model, we recommend that you verify compatibility before ordering. Details are on our “Delivery, Returns and Exchanges” page.

What payment and instalment options are available?

You can pay by debit/credit card and Tosla, and take advantage of instalment/credit options through Fibabanka and Akbank. Current options are listed on our “Payment Options” page.

Where is Yedepa located and how is delivery made?

Yedepa is an e-commerce site; orders are placed through yedepa.com and shipped to your address by courier from our warehouses across Turkey and from our contracted suppliers. Our head office is at Cennet Mah. 2. Yavuz Selim Cad. No:68/A, Küçükçekmece / İstanbul.