Elke 11.190 Refrigeration System Leak Stop Sealant 60 ml

Product Information: Brand: Elke, Quantity: 60 ml, Country of Manufacture: Spain. This product is for professional use only, and wearing safety goggles and gloves is recommended during use.

In the field it is also known as a leak sealer or refrigerant leak sealer.

Preliminary Check Test

Applies only to the leak stop procedure for air conditioning and HVAC systems.

• Vacuum the air conditioning system for 5 minutes.
• Reach "-1 bar" and hold this value for 4 minutes (mandatory condition). If you cannot hold this value, the leak is too large to be repaired.

Instructions for Use

1. Turn on the air conditioner.
2. Connect the appropriate hose (supplied separately) to the syringe. Fill the hose completely by pushing the syringe plunger.
3. Connect the syringe to the low-pressure port of the air conditioning system.
4. Inject the product into the system by pushing the syringe plunger, then disconnect.
5. Run the air conditioner for 20 minutes for the product to take effect.

Note:

Use and application of the product must always be carried out under the guidance of an expert technician. Incorrect application may damage your appliance.