Bekatech BT43 Vacuum Cleaner Motor 1400W – Arçelik 9320 Model

Bekatech BT43 is a 220V 1400W single-fan vacuum (fan) motor used in Arçelik 9320 model vacuum cleaners. In vacuum cleaners whose suction power has dropped, that have become noisier or that do not work at all, the motor is replaced as a complete unit; this product is manufactured to original spare part standards and is a solution that service companies and competent users can install directly. The application specified by the manufacturer on the box is the Arçelik 9320 model.

Vacuum Cleaner Motor to Original Spare Part Standards for Arçelik 9320 Vacuum Cleaners

• Product Code: BT0143 (manufacturer code: BT 01 43 / type: BT 43)
• Brand: Bekatech
• Operating Voltage: 220 V
• Motor Power: 1400 W (value stated on the motor label)
• Type: Single-fan vacuum (fan) motor, commutator with segments, dual carbon brush holders
• Connection: Standard faston (blade) terminals and cable outlet
• Certificates: CE, RoHS
• Origin: P.R.C.
• Application Stated on the Box: Arçelik 9320 Model

BT43 Dimensions, Technical Values and Compatibility Check

• Dimensions: Motor body diameter 116 mm · Top diameter 70 mm · Total height 132 mm · Base (fan cover) diameter 124 mm. A dimensioned technical drawing is in the product gallery.
• Compatibility is verified by dimensions. For vacuum cleaner motors, a brand-model list alone is not enough; the deciding factors are the base diameter, body diameter, height and gasket seating surface. Before ordering, compare these four dimensions of the motor you will remove with the drawing in the gallery. It can also be used in other models that use a 1400W single-fan motor with the same dimensions.
• Do not neglect the carbon brushes and gasket when replacing. When the motor is replaced as a whole, the carbon brushes are new; however, if the felt/gasket between the body and the container is worn, it will leak air and the suction of the new motor will also be weak. Clean the gasket surface and renew it if it is damaged.
• Weak suction is not always caused by the motor. Before replacement, check for a clogged hose, a full dust bag/container, a dirty HEPA filter and a leaking lid gasket. Typical signs of motor failure: sparks/burning smell, a high-pitched whine, loss of speed and catching while rotating.
• Installation warning: Connect the wires according to the original diagram, do not force the fan cover when seating the motor and refit the vibration pads. Unplug the appliance for any electrical work.