Elke Poe 32 Refrigeration Compressor Oil 20 Liter

A Large Pack of Quality and Reliability

Country of Manufacture: Italy. Elke Poe 32, with its 20-liter large packaging, offers a high-quality solution for your industrial refrigeration systems. Clear and pale yellow at 20 °C in liquid form, with its pour point below -45 °C it provides comprehensive protection.

Superior Features

• Flash Point: per the ASTM D 92 standard, 235 °C.
• Density: at 20 °C, approximately 960 kg/m³, a high-density and reliable product.
• Water Solubility: With its hygroscopic properties, it helps protect your systems from moisture.
• Acid Value: Below 0.1 mg KOH/g, offering high purity and protection.
• Biodegradability: according to the OECD 301B test, more than 60%, an environmentally friendly product.
• Dielectric Strength: per IEC 60156 @ 24 °C, >75 kV, ensuring electrical safety.
• Kinematic Viscosity: 28-36 cSt at 40 °C and 5.8-6.0 cSt at 100 °C, providing excellent fluidity.
• ASHRAE 97 Thermal Stability: Clean, deposit-free performance in the 175 °C, 336-hour test.

Reliability Proven in Demanding Tests

In Elke Poe 32, water content and acidity (TAN) values remained at extremely low levels, and the viscosity change showed stability below 3%. In terms of metal content, the tests showed that no metal mobilization was observed, which indicates that the product will provide long-term protection and performance in your refrigeration systems.

Compatible Refrigerants and Applications

• Compatible refrigerants: Compatible with R134a, R404A, R407C, R410A, R32, R507, R22 and R1234yf (Elke refrigerant–oil compatibility table; full list on datasheet page 4).
• Not used: Not used in ammonia (R717) systems; the manufacturer recommends mineral oil for these systems.
• Compressor type: ISO VG 32 grade POE; reciprocating (hermetic and semi-hermetic) compressors are the recommended application.
• Use: Initial compressor fill and oil top-up; retrofit from R12 / R22 / R502 to HFC refrigerants in systems with mineral or alkylbenzene oil residue.
• Miscibility: Miscible with mineral, alkylbenzene, PAO and other POE oils; incompatible with PAG oils. Properties change when mixed with oil of a different viscosity.
• Protection: Anti-wear additive package for steel and aluminum surfaces; rust and corrosion protection including copper alloys; compatible with paints, coatings and elastomers.
• Water content: Below 50 ppm in new product.

Storage and Handling Warnings

• POE oil is hygroscopic and absorbs moisture from the air: close the container tightly immediately after use; store in a dry place between −20 … +40 °C.
• If the product has been stored below −20 °C, warm it above 20 °C before use.
• Packaging: 20 L container. The manufacturer's datasheet lists 250 ml / 1 L / 5 L formats; the 20 L pack is the bulk format of the same oil.
• For transport and safety information, see the product label and the material safety data sheet (MSDS).

Technical document: Elke POE compressor oil datasheet (PDF, English, Rev. 0 – 10/2020)